Accurascale Announces the PTA/JTA/JUA!
It's time to announce our next wagon in 4mm scale; the iconic Redpath Dorman Long built PTA/JTA/JUA bogie iron-ore/stone tippler wagons.
These characterful wagons were built in three batches by the British Steel subsidiary Redpath Dorman Long from 1972 for transporting iron ore to Consett, Llanwern, and Ravenscraig.
The tough looking tipplers stood out further with attractive liveries and rode on distinctive BSC ‘Axle Motion’ bogies soon became a favourite of the enthusiast as they became synonymous with the heaviest trains on the British Rail network. The Port Talbot to Llanwern trains saw 27 British Steel PTA tippers triple headed by Class 37s, before the introduction of pairs of the then new Class 56 on 30 wagon trains.
Following the closure of Consett in 1980, a batch of PTAs became temporarily redundant before being snapped up by Procor. These soon found work on Mendip stone trains, going both to Foster Yeoman and ARC. Their use was in block formations from quarries at Merehead, Whatley and Tytherington to depots in London and the home counties.
Once again, the PTAs found fame as wagons in the heaviest regular freight trains in the UK, with 43 wagons being hauled by a pair of class-56 locomotives from Merehead to Acton for Foster Yeoman.
The wagons would be painted in distinctive house liveries of Yeoman grey and ARC mustard, and see service behind the then new Class 59, as well as a wide range of BR locos, much like their British Steel counterparts which were enjoying electric traction haulage on the WCML with pairs of Class 86 and Class 87 locomotives.
The PTAs continued to provide sterling service for British Steel across Britain as well as Yeoman, ARC and its successor Mendip Rail into the 2000s when age began to catch up on them.
Wagon leasing company VTG took on rakes of JTA/JUAs in the mid-2000s and they were used on spoil trains as well as sand and sea dredged aggregates until withdrawal.
These long lived and widely travelled wagons are the subject of the fifth new 4mm wagon model from us here at Accurascale. like all our previous wagon announcements, this pattern of PTA/JTA/JUA is a wagon never done in RTR format in 4mm scale before.
CAD for the wagons is compete and is now in China with tooling underway. As with all Accurascale models, a high specification model laden with separately applied detail will be produced with the following specification:
- OO Gauge / 1:76.2 Scale Models
- NEM Standard Coupler Pockets in ‘kinematic’ Fittings
- NEM Narrow Tension Lock Couplers Provided on outer wagons, with knuckle couplers on inner wagons as per prototype
- Sprung Buffers
- BSC Axle Motion bogies
- Designed for easy conversion to EM and P4 gauges
- Etched metal factory fitted detailing
- Extra fine factory fitted detail plastic parts
- Extra fine factory fitted Pipework
- Individual lettering, logos and codes from real wagons for authenticity
- Flashing tail-light on one outer wagon per pack
A whole host of liveries will be catered for in the first run, including British Steel, Yeoman, ARC and VTG. The wagons will be sold in ‘book’ sets of 5, with both outer and inner wagons. There will be additional book sets of 5 inner wagons in both Yeoman and ARC liveries to boost rakes to prototypical lengths.
The price of each book set is £149.95, with a 10% discount if you buy both the outer and inner sets of the yeoman or ARC wagons. Delivery is expected in January 2020. You can place your order now at https://accurascale.co.uk/collections/pta-jta-jua-bogie-tippler-wagons